Energy monitoring connected to operations

EOS collects electricity data from Elhub and local energy meters, and shows consumption alongside the operation of ventilation, room control and heating.

Econex EOS is the umbrella name for the energy functions in Econex SD.

Econex · EOS
Energistatus denne uken
Totalforbruk
-18%
vs forrige uke
Spart
2,4
MWh
Driftstiltak
7
iverksatt
Ukeforbruk
ForrigeNå
Ma
Ti
On
To
Fr
Lø
Sø
Illustration with sample figures.

Start with EOS. Add more when you need it.

Below are common setups. They all use the same meters and operating data, so a module can be added without rebuilding what is already set up.

  • One building: energy monitoring

    The base. Electricity data from Elhub and local energy meters in one overview for the building, with the project's energy and price settings. Consumption is shown alongside operating data from ventilation, room control and heating.

    • Electricity data from Elhub
    • Local energy meters
    • Energy and price settings per project
    • Connected to operational data from ventilation, room control and heating

    Includes: The base

    Econex · Energy follow-upIllustration
    Energy follow-up
    Building A · 5,000 m² GFA
    EOS
    Consumption
    48,210kWh
    −12 % vs. previous period
    Cost
    62,191kr
    −9 % vs. previous period
    kWh/m²
    9.6
    30 d
    Peak load
    182kW
    30 d
    Consumption per dayActualExpected (temperature corrected)
    Breakdown
    Heating22,177 kWh
    Ventilation13,499 kWh
    Lighting6,749 kWh
    Other5,785 kWh
    −12 % vs. previous period
    Illustration with sample figures.
  • Tenants: calculation and sub-metering

    Sub-meters per tenant are linked to the calculation. EOS allocates the electricity cost including grid fees and taxes, and produces per-tenant reports that can be passed on to accounting.

    Includes: The base + Tenant calculation

    Read more about tenant billing
    Econex · EOS · Leietakere
    Januar 2026 – Månedsrapport
    4/6 sendt
    Totalt fakturert
    84 320 kr
    Nettleie
    22 180 kr
    Leietakere
    6
    vs. forrige md.
    -8%
    Advokatfirmaet Hauge
    380 m² – 2. etg.
    4 648 kr
    Sendt
    Nordic Consulting AS
    520 m² – 3. etg.
    6 624 kr
    Sendt
    Tannlege Eriksen
    160 m² – 1. etg.
    2 496 kr
    Klar
    FitZone Treningssenter
    680 m² – U. etg.
    13 488 kr
    Sendt
    Bakgården Kafé
    120 m² – 1. etg.
    3 600 kr
    Utkast
    Automatisk rapportflyt
    Data innhentet
    Automatisk fra målere
    Beregning utført
    Nettleie + energi + avg.
    Rapport generert
    PDF til regnskapsavd.
    Sendt til regnskap
    Automatisk e-post
    Automasjon
    Automatisk datainnhenting fra alle målere
    Nettleie beregnet etter gjeldende tariffer
    Elavgift og enova-avgift inkludert
    PDF-rapport sendes til regnskap den 5. hver md.
    Kreditnota ved feilberegning genereres automatisk
    Illustration with sample figures.
  • Solar: own production against consumption

    Inverters are linked to data points in the SD, and solar production appears in the energy overview next to the building's consumption. If the building has tenants, production can be included in the tenant calculation.

    Includes: The base + Solar setup

    Econex · EOS · Solenergi
    Solcelle­produksjon i dag
    Produksjon
    42.8
    kWh
    Forbruk
    102.6
    kWh
    Selvforsynt
    38%
    i dag
    Produksjon vs. Forbruk
    ForbrukSol
    06
    07
    08
    09
    10
    11
    12
    13
    14
    15
    16
    17
    18
    Energiflyt
    Solproduksjon
    42.8 kWh
    +12%
    vs. i går
    Kjøpt fra nett
    68.2 kWh
    -24%
    pga. sol
    Solgt til nett
    8.4 kWh
    +340 kr
    i dag
    Illustration with sample figures.
  • Room energy: consumption per room

    Energy use and energy links at room level, with simulation. When room control is also in the SD, energy is seen together with temperature and comfort in the same room.

    Includes: The base + Room energy

    Econex · Room controlIllustration
    Room control
    Building A · 11 rooms
    Running
    Floor 2
    2.14 · Meeting room Fjord
    Temperature
    21.1°C
    Setpoint
    21.0 °C
    Comfort
    HeatingCooling
    Cooling 20 %
    CO₂762 ppm
    Good air quality
    VAV
    40%
    Lights
    Ceiling
    Board
    Wall
    Time in comfort bandEOS
    97%
    last 30 days
    Energy 2.14
    4.2kWh/m²
    last 30 days
    Illustration with sample figures.
  • Energy thieves and deviations

    Analysis of energy thieves based on the meters and energy data. Consumption outside operating hours can be checked against the plants that are running, and followed up with Teknisk partner.

    Includes: The base + Energy thieves

    Econex · Energy follow-upIllustration
    Energy follow-up
    Building A · 5,000 m² GFA
    EOS
    Consumption
    48,210kWh
    −12 % vs. previous period
    Cost
    62,191kr
    −9 % vs. previous period
    kWh/m²
    9.6
    30 d
    Peak load
    182kW
    30 d
    Consumption per dayActualExpected (temperature corrected)
    Breakdown
    Heating22,177 kWh
    Ventilation13,499 kWh
    Lighting6,749 kWh
    Other5,785 kWh
    −12 % vs. previous period
    Deviation · night consumptionTeknisk partner
    Night consumption is 18% above expected for the last 3 days. AHU 360.003 runs outside operating hours.
    Illustration with sample figures.

More buildings, energy map and reporting

These parts have no screen view here. We are happy to show them on one of your buildings.

With the AI gateway you can ask questions across the buildings you have access to.

Read about the AI gateway
More buildings
Each building is set up with its own meters and energy and price settings, built the same way from building to building. The buildings can then be compared with each other and with their own historical data.
Energy map
Shows which rooms and functions each energy meter covers. Useful when checking the meter structure, or when tracing a deviation from meter to plant.
Reporting and export
Energy data is exported to other systems, through export units or manually, for energy reporting and further analysis.
Energy targets and measures
Targets for energy use followed up over time, and the measures meant to reduce energy use collected in one place.
Energy contracts
The energy contracts linked to the buildings and meters, used in the price settings.

Meters over M-Bus, Modbus and pulse, plus Elhub

Main consumption is collected from Elhub once the customer has granted access. Local energy meters connect over M-Bus, Modbus or pulse output, and give detailed figures for technical plants, tenants and sub-areas of the building.

  • Elhub data provides a stable basis for historical consumption and reporting.
  • When energy data is viewed together with operations, it becomes easier to understand peaks, anomalies, and changes.
SourceUsed for
ElhubMain consumption and historical electricity data for the building's metering points.
M-BusEnergy meters for electricity, heat and water.
ModbusElectricity meters and other technical equipment over Modbus RTU or TCP.
PulseMeters with a pulse output, wired to an input in the automation.
BACnet, KNX and MQTTMetering points that already exist in BMS, room control or IoT gateways.

See EOS on your building

We go through the building with you and show which modules add the most value.

The price depends on the building and the modules you choose.

Request demo